Construction

Fixing common problems with timber floors

There’s a lot of reasons to go with timber flooring. A good visual style. Floors that last for years. A few samples of how good they appear can be seen here: https://falconflooring.co.nz/.

https://falconflooring.co.nz/

However, sometimes wood flooring might not be as perfect as we’d prefer. Every now and then, a homeowner would complain about how his timber floors aren’t as good as they might have been led to believe.

The two most common issues are warped boards and squeaking noises. Both issues are not exclusive, as sometimes warped wood is the reason for squeaks when walking on a floorboard. So, how does one go about and fix those issues?

Moisture warps wood

Humidity, ceiling leaks, or broken plumbing may cause wood to warp and bend. So, the first course of action is to eliminate any source of moisture.

Then, get that warped piece straightened out. An easy way to do so is to get the bending areas soaked in hot water. The heat will help the wood be more pliable. Afterwards, place some weights on it, so it will dry out straight.

An ingenious way to deal with the damaged area is to switch floor panels with those under inconspicuous areas. Choose floorboards that are underneath the closets and cupboards. They might not be exactly fixed, but no one will be aware of the switch.

Don’t have any means to fix that damaged floorboard?

If the piece is sticking out, sanding might be an option. Shaving off the area that’s peaking up will make the floor even. Bear in mind that these courses of action will cause the flooring to get thinner, not to mention will be labour intensive. But if done right, the floor will look good again, just as how floors look here: Falcon Flooring.

Squeaking

As mentioned, sometimes walking on warped wood may cause a squeaking sound. However, if fixing the boards doesn’t remove the noise, there’s a few quick fixes you can do.

A bit of lubrication may ease the friction between the wood and the nails (or whatever is keeping the floorboards in place). Sprinkle in some talcum powder or any similar fine substance between the gaps of the floor.

Sometimes a nail might’ve come too loose. Or, it was nailed in to a spot that can’t hold. Put in some screws to secure the panels. Using another nail might not be enough. Don’t use a large screw though. Too big, and the sub floor might get damaged.

Maybe the fitting is uneven. If you can go underneath the flooring, insert some shins to remove the small uneven areas. An alternative is filling it in with wood glue or other types of adhesive. Let it set and dry before stepping on it, though.

These are just simple DIY fixes. Maybe, these aren’t viable actions or didn’t work. Or, maybe any of these aren’t viable options for one reason or another. In that case, a full replacement might be necessary.

Want to add more detail to your home’s interior? Don’t know where to get the best flooring options? From installation and polishing to maintenance, this site can help you: https://falconflooring.co.nz/.

Construction

Prepare for a flood with these 4 easy steps

Our day to day weather is unpredictable nowadays. Because of the growing concern about climate change, you are always caught off guard when calamities strike. One of the worst incidents that may hit your area is a flood. This is a very serious calamity since it may wash out your properties and put your lives at stake. Good thing there are always innovative remedies for a flood that can be found here: http://floodfree.com.au.

http://floodfree.com.au

If you think your area is a flood zone, you have to be prepared always. Follow these tips below to guide you on how to prepare for a flood at all times.

1. Watch the news

When there is a calamity, the first thing we should do is to listen to the news. The broadcasters will tell you everything you need to know when it comes to preparation and anticipation of the coming severe weather condition. Flood is often caused by hurricanes, storm surges, and heavy rains, so it is a very common problem.

The news often indicates the possibility of flooding if a hurricane or storm surge is strong enough or if heavy rain is persistent. If you are situated in a flood zone area, make sure to stay tuned when there are severe weather conditions like this. Listen to the authorities as they know what is best for your safety.

2. Prepare your emergency kit

In good and in bad times, you should always have an emergency kit. You’ll never know what will happen the next day, so it’s best to be prepared. An emergency kit is something you can easily grab whenever you need to go to an elevated area.

A basic emergency kit should always have the following:

• Water

• Non-perishable food

• Medicine

• First aid kit

• Flashlights

• Battery-operated radio and batteries

• Cash

• Spare clothes

• Important documents

It is recommended that each adult family member should carry one, especially if you have children with you. Note that these are all equally important as these will help you survive at least until the worst is over.

3. Flood mitigation

Whenever we hear about the possibility of a flood, the first thing we do is to prepare, just as we prepare for hurricanes and other disasters. You can always minimize the damage caused by flooding by preparing and mitigating.

You can start off with securing your appliances and furniture. Move them to a higher area and cover them. Also, look for power cords and sockets that are on the floor. Cover the sockets and remove the cords on the floor.

However, if you want to be fully protected from flooding, consider installing flood barriers found here: Flood Free.

Flood barriers are very effective when it comes to addressing flood problems. They come in various types to efficiently block flood whatever property you have. Having them installed is one of the best mitigation measures you can consider in such situations.

4. Secure your family

When you think you have done everything to prepare for the flood, it’s time to secure your family’s safety. Inform each family member about the things they shouldn’t do during flooding, such as going outside to enter the floodwater and eating or drinking something that is contaminated by floodwater. Your family’s safety should be your topmost priority to avoid circumstances.

Protect your family by installing flood barriers today. Just visit http://floodfree.com.au for more info.


Construction

3 tips for any beginner home DIY enthusiast

When it comes to DIY home improvement, Australians surely believe in go big or go bust. According to Statista, the toys, hobby, and DIY segment in the country could achieve a compound annual growth rate (CAGR) of 4.9% from 2014 to 2023. By the end of the forecast period, it could have a market volume of more than $3 billion. The success may be due to the accessibility of DIY tools like the ones you can find here: https://www.audel.com.au/.

If it’s your first time to do a DIY at home, however, you need to have more than accessibility to the right tools. To make sure you will succeed in your DIY projects, keep in mind these tips:

  1. Know the differences between the variants

Different tools, different uses—just because they look alike doesn’t mean they function the same way. Take, for example, pipe wrenches.

These wrenches vary depending on where you plan to use them. The offset wrench is what you need when you have to work on pipe sections with unusual angles. If the pipe already experiences stiffening due to aging, perhaps you’re actually looking for compound leverage pipe wrench.

It may be helpful for you to invest in kits, which you can find here: Audel Tools. These kits are usually toolboxes with the right tool variants inside.

  1. Don’t scrimp excessively

DIY tools can be expensive, so you may think about going for the cheapest option. Compare hand saws and power saws, for instance.

While handsaws are more portable and more affordable, especially since you can save on electricity, they can also increase the risk of musculoskeletal injuries. Power saws can also help you save a lot of time, and you can work on more types of wood. You can also cut your materials in various shapes and sizes with higher efficiency and ease.

You would still want to choose tools that give you the most value. In other words, these are the ones you need. When it’s essential to spend more to speed up work and improve safety, then do it.

  1. Invest in safety gear

Most of the DIY tools these days are already designed to be easy, convenient, and simple. In the process, they are safe to use. As the cliché goes, though, it’s always better to be safe than sorry.

Complement the tools with the right gear and equipment, which you can find here: https://www.audel.com.au/. Wear hearing protection when the tools are going to produce loud sounds.

Wear a respiratory mask when you have to deal with wood dust and other microparticles. Don’t forget your safety glasses and gloves as well.

Most of all, buy a toolbox or a cabinet that can store all these tools safely. Place it in the shed, garage, or part of the house that is inaccessible to children and pets.

Conclusion

Doing DIY is a fun activity that will improve your creativity, ingenuity, and innovation. It will also boost your problem-solving skills, and some projects can provide you with memorable bonding time with the family.

It, however, demands proper planning and buying the right tools and safety equipment. This way, you can do more and be efficient even if it’s your first time.